Quick4 High Capacity Chamber

The Quick4, High Capacity Chamber can be placed in a 36-inch wide trench. It is suitable for straight or curved systems. The patent-pending Contour Swivel Connection, allows for turns of up to 10 degrees, left or right. MultiPort, the end cap, allows for multiple piping options and eliminates all pipe fittings. The chamber’s length of four feet allows for optimal installation flexibility. It can fit in a trench measuring 36 inches wide and is suitable for straight or curved systems. The patent-pending Contour Swivel Connection, allows for turns of up to 10 degrees, left or right. MultiPort, the end cap, allows for multiple piping options and eliminates all pipe fittings. The chamber’s length of four feet allows for optimal installation flexibility.

Benefits:

  • Advanced contouring connections can swivel to 10deg right or left
  • Installation is quick and easy with the latch mechanism
  • Compact nesting allows for more trench length at the same height as the stack height.
  • Easy to install and handle chambers measuring four feet long
  • Supports wheel loads up to 16,000 lbs/axle and 12″ of cover
  • The International Association of Plumbing and Mechanical Officials has certified them (IAPMO).

Product Features

  • 62 gal storage capacity
  • 12.2 in H louver
  • 48 in L effective
  • Advanced contouring connections can swivel up 15 degrees right or left
  • Installation is quick and easy with the latch mechanism
  • Compact nesting allows for more trench length at the same height as the stack height.
  • Four-foot chambers can be easily installed and handled.
  • Quick4’s high capacity chamber can support wheel loads up to 16,000 lbs/axle and has only 12 inches of cover

FAQ’s

What are the best places to find local installation codes, system designs, and technical questions?

Local codes govern many installation options and requirements. If you have any questions, contact your local health department. The chambers will have a firm footing. This does not affect the infiltration rate of sands. Infiltrator MicroLeaching, sidewall louvers are designed for soil protection. Therefore, filter fabric is not necessary. The MicroLeaching, patented louver design in Infiltrator chambers corresponds to the soil angle. This allows effluent to drain from the sidewall, while keeping soil out.

What Systems Can Infiltrator Chambers be Installed in?

Infiltrator chambers are suitable for almost all septic leach fields. Infiltrator chambers are able to be used wherever stone and pipe can fit. These include trench, bed and elevated mound installation. Infiltrator chambers offer superior treatment capabilities for pressure dosing and serial distribution.

What is the maximum size of the Leach Field that can be reduced when I install Infiltrator Chambers?

Each local health department determines the system size. Health departments usually approve sizing cuts of 25 to 50% when Infiltrator chambers have been specified. For details, check your local health codes.

Can chambers be installed under a driveway or paved surface?

Some codes prohibit the installation of septic leach fields under impervious surfaces, such as driveways. The reason is that the soil can be compressed by the pressure of the surface, which can cause a decrease in its ability to filter effluent (wastewater). For the exact codes applicable to your area, check with your local health department. Infiltrator water technologies can help you determine if this type of installation is permitted. A knock-out area is located at the top of each chamber and is used to install an inspection port. A splash plate under the inlet is required for inspection. Be careful when backfilling to avoid causing damage to the inlet pipe.

What is Infiltrator water Technologies’ Minimum and Maximum System Coverage?

Infiltrator Water Technologies recommends that the chambers have a minimum of 12 inches of covered compacted material. The maximum allowable cover for chambers in trench systems is 96 inches. Maximum cover for bed systems is 48 inches. Minimum cover can be reduced to six inches if the drainfield is not in use. When installing a 6-inch system, be careful with your equipment. Infiltrator Water Technologies offers a line for Shallow Cover (SC), Chambers. These allow for six inches of coverage with an equivalent H-10 loading rate. However, these are limited to certain markets. For specific requirements regarding cover, always check with your local health codes.

Leave a Reply

Your email address will not be published. Required fields are marked *