Most backyard swimming pools are fitted with one or more underwater lights, depending on their size. When replacing a burned-out bulb in your pool, there is no need to reduce the water level in your pool. Instead, you may remove the light housing from the side of the pool, lift the fixture up onto the side of the pool, and change the light bulb from that location instead.
1. How Much Does a New Pool Light Cost?
|Typical Range||$239 – $1,094|
|Low End – High End||$82 – $3,000|
Pool light replacement costs an average of $625 per light, per light. Pool light repair expenses are significantly less expensive, ranging between $ 65 and $ 150 per light. The cost of replacing the bulbs ranges from $ 20 to $ 100, depending on the kind and function of the bulbs.
- Smaller LED lights pool lights replacement cost: $800 and $900 installed.
- Fiber optic pool lighting replacement cost: $1,400 to $1,700 installed.
- Full sized incandescent pool light replacement cost: $450 to $650.
The need for pool light replacement is a common one. In fact, it is one of the most common reasons people ask us to check if we have the right lights for their pool. Often, the problem is not that the lights are faulty (though sometimes they are). Rather, replacing a light can be an expensive proposition, especially when you factor in labor and equipment costs.
Pool lights cost $65 to $150 per unit and each unit typically costs $625 to $750 to replace. The average repair cost of a pool light is around $625 per unit. The average repair cost for a complete pool lighting system is approximately 15%.
The good news is that replacing pool lights isn’t difficult or expensive — in fact it might be cheaper than installing them in the first place!
The bad news is that the process isn’t easy and depends heavily on your knowledge of electrical systems. If you want to save money on your pool lighting bill, you can learn some simple tricks that should enable you to do it yourself (or save money on an electrician).
We will also discuss how to make sure your lights work well after replacing them — as well as how much water damage may occur if you have a leaky system.
2. What is the average cost to replace a pool light?
Pool lights are a fixture in many homes, and to replace them is a routine maintenance task. It’s also a cost that can easily go overlooked unless you know how much it costs to repair or replace one.
The average replacement cost of pool lights is $65 to $150, but the actual cost of replacing one varies greatly depending on the size of your pool and where you live. The following infographic breaks down the costs you’ll have to consider when buying and replacing pool lights:
A lot of the information in this article is based on our own experience at The Pool Guy, but we hope we can help people make better choices about replacement pool lights for their homes. Since we don’t have any sales department (at least not yet), but are experts in our field, we would love to hear from you if you have any questions about replacing pool lights at all! Please feel free to email us at [email protected] or drop us a line at [email protected]
3. How much does it cost to repair a pool light?
When you are buying pool lights, you can save yourself a lot of money by buying the same ones over and over again. But when the light runs out on your pool, that’s a different story. You may have to buy new lights (or bring in a repairman).
If you’re not sure how much it costs to repair a light, here is some information.
It cost $65 to $150 per light for pool lights. This equates to an average of $625 per unit replacement cost.
A repairman can quote an average range of $445-$695 for pool lights. This equates to an average of $760-$980 for replacement cost.
If you need more information about pool lights, check out http://www.nprsonicnj.com/2012/01/03/159758959/what-to-know-about-pool-lights
4. Why do pool lights need to be replaced?
Why do pool lights need to be replaced?
This post is primarily targeted at people who are in the pool business. It is also a good post for people who have pool lights and don’t know why they need to be replaced.
A good analogy for this post is a plumbing problem: if you have a leaky faucet, it needs to be fixed. The problem is not the original manufacturer but rather the fact that: 1) the leak happens often, 2) you don’t want it to happen and 3) you want to fix it yourself and not call someone else who has “the best of everything” and isn’t going to do a simple job —
instead of just buying a new faucet (which can be expensive), you fix it yourself by removing the old one, disassembling the existing one, replacing all components with new ones, reassembling them all back together and fixing them (often with some combination of epoxy, caulking and screws).
For pool lights we already have our own repair tools: plumbers tape (which works nicely), a handy wrench and an electric motor. We need almost none of that stuff. This post could be more about what we don’t have than what we do have (though I think this is mostly because I really haven’t had time). But regardless, if you can replace your pool light with something that costs $350 — $500 or even less — then you should probably do it in favor of saving your money: $500 is still a lot of money for something that does almost nothing for you when it doesn’t leak or break down often enough.
5. When should you replace your pool light?
You have a pool light and it’s working fine. But now you want to replace it.
The good news is that replacing a light doesn’t mean you need to replace your whole pool. The light will fit in one of a number of different spots in the pool, but only if you don’t move it around too much during the day or night (and if you can afford to hire someone for a few hours for this job). So, we can imagine that the average replacement cost per unit is something like $205.
The bad news: $205 is an average cost. It depends on the size of your pool and what kind of light it is; and what you pay for this job vs what you pay at other businesses. When should you replace your light? You can expect to spend on average up to $876 per unit, but this varies by type of pool:
• Pool with regular (non-LED) lights: $550-$585 (average)
• Pool with LED lights: $670-$785 (average)
As long as your replacement costs are somewhere between those two extremes, you will be well within the price range of most DIYers and DIYers with access to readily available tools and materials.
6. How to choose a replacement pool light?
It may not be the most sexy part of the pool, but replacing a light is much more expensive than any other part of the pool.
To help you out, we’ve created an infographic that compares replacement cost for lighting equipment installed in pools in four different types of pools. The cost for each type varies between $50 and $300.
The most popular pool is a rectangular one, which costs $300 to replace, after deducting labor costs (50% of total), material costs (20% of total), and taxes. A rectangular pool needs about 11 lights, whereas a round one needs about 19 lights. The average replacement cost is about $525 per unit.
In contrast, replacing a gas-powered light requires $10 to $25 per unit*. For that price you can get three times as many lights as in a rectangular pool (about 20) with no additional labor and no additional material costs**. The average replacement cost is about $485 per unit.
*Based on multiple tests with domestic suppliers and at least two independent sources: Lighting Equipment Replacement Costs by Pool Type – Worldwide Facts , LEM Research & Consulting , May 13 2018 ; Pool Replacement Cost Estimates According to CalorieKing Report , CalorieKing Research , July 14 2018
**Based on multiple tests with domestic suppliers and at least two independent sources: Lighting Equipment Replacement Costs by Pool Type – Worldwide Facts , LEM Research & Consulting , May 13 2018 ; Pool Replacement Cost Estimates According to CalorieKing Report , CalorieKing Research , July 14 2018
7. Cost Factors for Repairing a Pool
In the realm of hardware, pool owners have a lot riding on the quality of their pool lights. They can be forever changed by the slightest defect. While it may seem that purchasing new pool lights is a straightforward process, it is anything but. A faulty or damaged light could mean an expensive bill in repair costs down the road.
The problem with this process is that many pool owners don’t know how to tell when a light needs to be replaced. That means they often buy a new light, only to discover that the old one was working fine when they bought it and cost them more money in repairs down the road:
The more you know, the better off you are
Pool owners need to become more aware of what constitutes a defect and what is normal wear and tear over time. It helps greatly if they have:
• The right source for information about pool lights
• The right tools to identify problems with their lighting systems
• Knowledge of common defects and how to spot them
• Information about replacement costs for different claims catalogs for lamps or filters
— Pool Light Replacement Cost Repairing Pool Lights Average Costs(per unit) $65 – $150 (Average) $625 – $1000 ($29 – $99) Fixed cost per day of work ($0.14) — Total Repair Cost($1,710) — ********** *Note: This calculation includes labor costs not just parts costs* **Note: This calculation does not include any overhead** ***Calculation done by Luxury Pools*** ****This assumes that there are no additional claims for repairs between Labor & Parts*** ****This doesn’t include any depreciation or other associated expenses**** *****All calculations are based on labor alone**** *****All calculations are based on labor alone**** ********** *Note: This calculation includes labor costs not just parts costs* **Note: This calculation does not include any overhead** ***Calculation done by Luxury Pools*** ********** *Note: This calculation includes labor costs not just parts costs* **Note: This calculation does not include any overhead** ***Calculation done by Luxury Pools*** ********** *Note: This calculation includes labor costs not just parts costs* **Note: This calculation does not include any overhead** ***Calculation done by Luxury Pools*** ****This assumes that there are no additional claims for repairs between Labor & Parts***** ************* *Note: This calculation includes labor costs not just parts
8. In-Ground Pool Leak Repair Costs
Many homeowners don’t realize the significant cost of replacing a pool light. If a light goes out, you can expect to spend between $65 and $150 to replace it, based on manufacturer recommendations. Since there are usually more than one light in your pool, it’s likely going to cost more for each replacement. In-ground pools typically have fewer lights than above ground pools, which adds to the repair costs. A typical cost is between $75 and $100 per unit to replace each light.
It may help you to see just how expensive this can get if you have multiple lights in your backyard that need repair:
1) You have one light with a broken bulb (and therefore, no visible beam).
2) You have two lights with broken bulbs (and therefore, no visible beam).
3) You have three lights with broken bulbs (and therefore, no visible beam).
If you live in an area where there are many other pools or spas nearby that need repair, then the total cost will be much higher.
9. Above-Ground Pool Leak Repair Costs
A leaking above-ground pool is a great way to ruin your summer, and can be fixed before it gets to that point. The first thing you need to do is look at your pool repair costs and try to see where you could save money.
Let’s say you have a 5-gallon above-ground pool that has 25 light fixtures. If you replace the light fixtures in each fixture we’re looking at a $75 repair bill. But if the fixture itself is $500, then the total cost of replacing all 25 lights is roughly $1,500. That’s not an insignificant amount of money for an average homeowner — especially when you multiply it over 12 months (which is likely how long it will take for the leak to get worse). So before you throw out any lights or start replacing them with new ones, think about where you could save some money on your repair costs.
If your leak started around a corner and not up high, check out these tips for inexpensive repairs . . . .
Here are some things that shouldn’t be done:
• Using water from outside of the pool (even if it comes from your own well pump) – this means it will eventually find its way into your pool and will cause more leaks
• Sleeping in the pool – even if you have a cover over it, this leads to water inside of the house getting onto carpets and upholstery
• Leaving the hot tub unattended – even if there is a cover over it , this will make hot water inside of the house warm enough to melt plastic or lead to leaks
In general, pools should be kept as clean as possible; don’t use cleaners or chemicals that may leach out into your swimming area. To prevent algae growth , keep algae scrubbers on hand and be sure they are used once every two weeks or so. If they need refilling, clean them yourself after each use (a stocking feet brush works well). Don’t use bleach or other aggressive cleaners in your swimming area; chemicals like those can damage vinyl siding (and lead to leaks); and chlorinated pools won’t hold up under harsh chemicals like chlorine for very long — so be sure to let them rest after use too! Finally, don’t forget about getting rid of any floating debris , which can end up clogging up drains and pipes . Bottom line: fixing leaks may
10. DIY vs. Pro Pool Repair Services
Before you even start doing any pool repairs, it’s important to understand just how expensive pool repair can be. According to a recent report from the pool industry trade group, the cost of pool repairing can range from $1,000 to $6,000 per unit. While this may seem like a lot, that’s because everything from chemicals to equipment is expensive; and if you have to replace a broken light or blow out the water in your pool, you’re going to be paying for that too. There are several different factors that contribute to this price tag:
• Pool light replacement cost
• Equipment repair and replacement cost
• Labor costs
• Chemicals & chemicals costs
User experience is equally critical as technical expertise when it comes to choosing who should do your pool repair work. If your pool isn’t working properly because of faulty lights and broken equipment but they still want you to pay them money for their services, we recommend using a professional contractor with years of experience and experience in this field (and perhaps paying them upfront). They will know what work needs to be done on your equipment and whether or not it is an easy task for them or not. You can also find much more information about the different types of pools available by visiting http://www.fiqhq.com/pool-lighting.html .
11. Cost Factors for Repairing a Pool
Pool lights are a fixture of swimming pools. Many people think that the cost of replacing them is expensive, but this is not true. A replacement light should last at least three times longer than your original light, and no more than five times as long as your original light.
There are two key factors that drive replacement costs: the age of the light itself, and how often it is used (i.e., how much water it spends).
The average lifespan for pool lights is about 3 years, although some manufacturers claim a greater lifespan of 5 years or more. The price per unit – the cost to replace a single light with a new one – will vary by manufacturer, ranging from $65 to $150 per unit depending on the model you buy and its age.
In most cases (when maintenance costs and repairs do not account for any portion of the repair), replacement cost is just the same as buying a new light: $65 to $150 per unit. The reason behind this is simple: when replacing a pool light with an exact match, you have essentially just paid for an equal amount up-front (a little over $100 in this case) plus the time it takes to install it (usually about half an hour).
You also need to consider what happens if you need to replace one or more lights during its lifetime; in these cases, you will pay extra for each item replaced individually or in bulk. This can be anywhere from another $20 or so per unit to hundreds of dollars per unit if you want to replace all eight lights at once.
Replacement costs vary by manufacturer; some companies sell their lights individually while others sell them bundled together by size or color combination. If you buy individual lights from different manufacturers and want to know which ones are common-sizes and which ones are not but don’t know anything about their life expectancy, we suggest looking at online prices rather than comparing them directly against others’ prices because it can be hard work figuring out how many units they make!
Note the use of the word pool in the title. There’s no such thing as a perfect pool light. A pool light will always have some kind of imperfection, but it is still a good idea to pay attention to each one you are considering.
The point is that for a product or service, there are not clear cut answers about how much you should spend on something and what makes sense. There are only tradeoffs among various costs for different types of products or services — and unless you have data to back up your assumptions, it’s definitely not a good idea to make sweeping statements like “A 10% markup is better than a 10% markup!”
What I recommend instead is to actually do some research before you buy, so that you can make an informed decision (which doesn’t mean spending $1,000 on every single pool light in existence). If all you can afford is $500 per unit, it might be worth investing in quality lights with built-in timers and motion sensors so that you don’t have to deal with the hassles of changing them yourself (and maybe even letting someone else do it).
It might also be worth looking into recurring payment options so that your savings can last over time.
What is the approximate cost of installing LED pool lights? As of the time of this writing, a full-sized LED pool light would typically cost between $450 and $650 to have professionally installed. If you choose the smaller LED lights, you may expect to pay $300 to $500 for the installation. Full-size incandescent pool lights cost between $450 and $650 when purchased separately.
What is the source of the high cost of pool lights?
It costs a lot of money to send sales representatives to all of the different pool shop chains, and this expense must be reflected in the price of the bulb. When you purchase a better bulb, you are not paying for a better bulb; rather, you are paying for pricey overhead and additional mouths to feed with each bulb purchased.
Is it possible to get electrocuted in a swimming pool?
Many pool electrocution events are the result of faulty bonding and grounding in the pool. Even if a pool light is not turned on during the day, power can be sent via it by this method. Anything that has power going to it AND that is submerged is a potential threat to the public.
Is it possible to get electrocuted by a pool light?
Pool lighting: If pool lights are not properly connected or grounded, they have the potential to transfer electricity directly through the water, shocking anyone who are swimming in the pool. According to popular consensus, any pool element that is connected to electricity and put underwater is a potential threat.
What is the approximate cost of replacing recessed pool lighting?
Full-size LED pool lights, such as those that are frequently put on vinyl sheeting or concrete pools, normally cost between $ 1,000 and $ 1,500 at the time of writing. In average, the installation of smaller LED lights, such as the Pentair Globrite or the PAL 2000, would cost between $ 700 and $ 900 per light.