Nissan Altima P0075 IVT Control Solenoid Valve

Understanding P0075 Nissan Intake Valve Control Solenoid Circuit Bank 1

Overview

In the realm of automotive diagnostics, the OBD code P0075 for Nissan vehicles specifically addresses issues with the Intake Valve Control Solenoid Circuit in Bank 1. This article combines insights from two sources to provide a comprehensive understanding of this code, its potential causes, symptoms, and diagnostic procedures.

Causes and Symptoms

From the first article, we gather information about possible causes for the P0075 code:

  • Faulty Intake Valve Control Solenoid Bank 1
  • Open or shorted Intake Valve Control Solenoid Circuit Bank 1 harness
  • Poor electrical connection in the Intake Valve Control Solenoid Circuit Bank 1

The symptoms associated with this code include the illumination of the Engine Light (or Service Engine Soon Warning Light).

Description and Functionality

Both articles highlight the activation of the Intake Valve Timing Control Solenoid Valve by ON/OFF pulse duty signals from the Engine Control Module (ECM). This valve, found in Nissan vehicles such as the 370Z, Altima, and others, plays a crucial role in controlling the oil flow and adjusting the intake valve angle.

  • The longer pulse width advances the valve angle.
  • The shorter pulse width retards the valve angle.
  • When the ON and OFF pulse widths equalize, the solenoid valve ceases oil pressure flow, fixing the intake valve angle at the control position.

Service Manual Insights

The second article, sourced from the Nissan Altima 2007-2012 Service Manual, delves deeper into the Diagnostic Trouble Code (DTC) logic and confirmation procedures. It outlines steps to identify and rectify the issue systematically:

  1. Preconditioning: Turning off the ignition switch for at least 10 seconds before conducting the next test.
  2. DTC Confirmation Procedure: Checking for the detection of the 1st trip DTC after idling the engine for 5 seconds.
  3. Diagnosis Procedure: A step-by-step guide involving checking power supply circuit, output signal circuit, and the solenoid valve itself.
  4. Component Inspection: A detailed process of checking the resistance and functionality of the Intake Valve Timing Control Solenoid Valve.

Fixing the DTC P0075 2008 Nissan Altima Sedan

The combined articles provide valuable insights into fixing the P0075 code:

  • Visual Inspection: Checking the wiring harness and connectors for damage.
  • Cost of Diagnosis: The labor cost for diagnosing the P0075 2008 Nissan Altima Sedan code typically ranges from $75 to $150 per hour, depending on various factors.
  • Code Meaning: Understanding that an improper voltage is sent to the ECM through the intake valve timing control solenoid valve.

Leave a Reply

Your email address will not be published. Required fields are marked *