Infiltrator Septic System Cost

Installation costs for a septic system can cost anywhere from $2000 to $15000. A septic tank can cost anywhere from $500 to $2000 depending on its size and type.

Infiltrator products have been scientifically developed to improve wastewater treatment efficiency by optimizing soil’s natural treatment capabilities. The onsite system provides a reliable, passive way to treat wastewater at low costs while maintaining environmental quality.

Installation Cost

Installation of a septic tank system can be difficult due to extensive digging and damage done to the landscape. Replacement turf and other plants can cost $100-$1,000.

Labor costs

The average labor cost for professional septic system installations is $1,500 to $3,000, depending on the tank size and materials. You’ll pay approximately $160 an hour for materials, equipment rental, insurance, and material.

Additional charges

A building permit is required in most states and counties to install or replace a septic tank system. The cost can vary depending on where it is located and how complex the project is. For more information, contact your local planning/building department.

Average Cost

In the Midwest, the average cost of installing or replacing a conventional septic tank (including the tank), is $2,000 to $5,000. However, it can cost $4,000 to $12,000 more in areas with higher labor and materials costs.

A septic tank costs between $500 and $1,800 depending on its size (ranging from 300 to 1,000 gallons) or type. Materials costing $100-$200 more include piping and other items.

Infiltrator Tank

Infiltrator’s injection-molded tanks offer a breakthrough in plastic septic tank design. They are long-lasting and extremely strong, as well as water tightness. The tank should not be installed in areas where there is vehicular traffic. The tank is not intended for traffic.

Septic Tank System Prices

On average, a new septic tank system will cost $3,918. Prices can range from $1,500 up to $5,000. A 1,250 gallon system with 3 or 4 bedrooms will cost homeowners between $3,280 to $5,040. Installation of a septic system with two alternating pumps will cost on average $9,571 and can be up to $15,000.

Infiltrator Systems Benefits

  1. Traditional Stone & Pipe System
  2. You will only need a backhoe or pickup truck.
  3. Two people can easily assemble and install it
  4. You can transport lightweight chambers in one truck load and have them hand-carried to their final destination.
  5. A port for inspection is available to allow easy access to the field without any disruption.
  6. Geotextile is not required for solid-topped chambers.
  7. Cost overall is lower
  8. The trench bottom is accessible for effluent infiltration at 100% efficiency.
  9. Tree damage is the most serious, as well as stone removal.

The Most Expensive Septic System

Installing a mound septic system can cost anywhere from $10,000 to $20,000 This system is the most costly, but it’s often required in areas with low water tables, soil depth or bedrock. This system uses an elevated sand mound to drain the soil, rather than digging into it.

Buy a septic tank:

To find out if your local sanitation department maintains a list, check with them.The National Onsite Wastewater Recycling Association can refer you to a septic contractor.Ask about experience and training. Verify that the company has proper insurance, bonding, and licensing in your state.

Leave a Reply

Your email address will not be published. Required fields are marked *