Infiltrator Im 540

Infiltrator IM-540 septic/pump tanks are lightweight, strong, and durable. This tank design is compatible with Infiltrator’s custom-fit risers as well as heavy-duty lids. The Infiltrator injection-molded tanks offer a breakthrough in plastic tank design. They are long-lasting and extremely strong.

This tank design features Infiltrator’s custom-fit risers, heavy-duty lids, and is watertight. The Infiltrator injection-molded tanks offer a breakthrough in plastic tank design. They are long-lasting and extremely strong.

The tank should not be installed in areas where there is vehicular traffic. The tank is not intended for traffic.

All IM540 tanks can be assembled by our certified distributor network.

The Infiltrator tank installation instructions provide information on when buoyancy control measures should be taken and can be found here. The Infiltrator IM Series septic tank bufferancy control guidance document, which provides specific design options for anti floating measures, is available on this website if buoyancy control measures are necessary.

Specifications:

  • Size : 61.7″W x 64.9″L x 54.6″H (1567 mm x 1648 mm x 1387 mm)
  • Access Points – Each 24″ (610mm)
  • Weight: 169 lbs (77kg)
  • Capacity total : 552 Gal (2090 L).
  • Burial Depth : Minimum 6″ (152 mm), Maximum 48″ (1219 mm)

Advantages of Infiltrator im 540

  1. Additional strength is provided by reinforced structural ribbling
  2. Installable with 6″ to 48” of cover
  3. Polypropylene construction is strong and injection-molded
  4. Easy handling and delivery thanks to light-weight plastic construction and the inboard lifting lugs
  5. Access ports that are structurally reinforced eliminate distortion during installation or pump-outs
  6. Pump-outs: Can be dried
  7. This tank is suitable for rainwater (non potable) storage and pumping.
  8. This tank is suitable for rainwater (non potable) storage and pumping.
  9. There are no special backfill, installation or water filling requirements
  10. There are no special requirements for water filling
  11. You can fill the tank with appropriate native soil. For more information, refer to the installation instructions.

Infiltrator Im-540 Cost

Extra heavy-duty infiltrator tanks have thick ribbed walls that allow for dry burial up to 4ft deep

All septic tank kits come with lids, rubber grommets and PL68 drop tees to use with Sch40 or SDR35 4 inch pipes

  1. $347 Fluid Dynamics FDS216 non electric 16″ draw-down 2” Sch40, with rubber seal installed in IM-554
  2. $1027 IM540 552 Gallon Tank Kit, One Compartment, One Manhole, 62″ Wide x 55″ High x 65″ Tall
  3. $1597 CM-1060 Tank Kit 1111 Gallon, Two Compartment, Two Manhole 61.7″ Wide x 54.5″ x 134.2″
  4. $2067 IM-1530 Tank Kit 1537 Gallon, Two Compartment, Three Manhole 62″ Wide by 55″ High by 176″

Installation Locally

The tank should not be installed in areas where there is vehicular traffic. The tank is not intended for traffic.

Every septic tank’s manhole should have at least one manway raiser. It is difficult to open the lid and service the tank without a riser. It is standard to have at least one riser of 12 inches for each manway. However, you can bury deeper in colder climates. Dry burial is possible up to four feet deep with infiltrator tanks.

Local codes govern many installation options and requirements. For more information, consult your local health department and follow their codes. If you have any questions about design or installation, please contact the Technical Services team at Infiltrator water Technologies.

Infiltrator IM540 Plastic Septic Tank

American Concrete Industries has assembled a 2-piece plastic septic tanks. This tank can be used in remote locations, such as on islands with weight restrictions. You will need to get permission from the local code enforcement officer.

Leave a Reply

Your email address will not be published. Required fields are marked *