Infiltrator IM-1060

The Infiltrator IM-1060 septic tank is lightweight, strong, and durable. This tank design is compatible with Infiltrator’s range of heavy-duty lids and custom-fit risers. The Infiltrator injection-molded tanks offer a breakthrough in plastic septic tank design. They are long-lasting and extremely strong. The tank can be used for non-traffic applications. All IM-1060 tanks can be assembled by our certified Infiltrator distributors.

Im-1060 General Specifications and Illustrations

The IM-1060 plastic tank is an injection molded, two-piece mid-seam tank. The IM-1060 is an injection molded plastic design that allows for a precise mid-seam joint to accept an engineered EPDM gasket. The gasket design of Infiltrator uses technology from the water industry to ensure a watertight seal. Two-piece construction is secured using a series non-corrosive plastic alignment dots and locking seam clips. The IM-1060 can be assembled and sold by a network certified Infiltrator distributors.

Benefits:

  • Installable with 6″ to 48” of cover
  • Pump-outs: Can be dried
  • This tank is suitable for use as a pump tank, septic tank or rainwater (non potable) tank
  • There are no special backfill, installation or water filling requirements
  • There are no special requirements for water filling
  • You can fill the tank with appropriate native soil. For more information, refer to the installation instructions.
  • Polypropylene construction is strong and injection-molded
  • Easy handling and delivery thanks to light-weight plastic construction and the inboard lifting lugs
  • Access ports that are structurally reinforced eliminate distortion during installation or pump-outs
  • Additional strength is provided by reinforced structural ribs and fiberglass bulkheads

Specifications:

Size

62.2″Wx127″Lx54.7″H

(1580 mm x 3226 mm x 1389 mm)

Two Access Points

Each 24″ (610 mm)

Weight

320 lbs (145kg)

Total Capacity

1287 gal (4872 L)

Working Capacity

1094 gal (4141 L)

Burial Depth

Minimum 6″ (152 mm)

Maximum 48″ (1219 mm)

FAQ’s

What Type Of Buoyancy Controls Can Be Used In Shallow Groundwater Conditions?

The Infiltrator tank installation instructions provide information on when buoyancy control measures should be taken. They are also available online. The Infiltrator IM Series septic tank bufferancy control guidance document, which provides details on anti-floatation design options, is available to those who need them.

Is The Infiltrator Tank Approved For Use In My Local Area?

All Infiltrator tanks have been certified by CSA and IAPMO, two of the most respected certification agencies for tank technology. To be certain, please check with your local health department before you use the tank.

How Do I Attach The Risers To Infiltrator Tanks

This website contains Infiltrator’s riser guide document and a video. These documents provide details on how to attach a range of commercially available risers made by Infiltrator.

Can Im-Series Tanks Be Assembled In The Field?

No. IM-series tanks are only allowed to be assembled by individuals who have been authorized and trained by Infiltrator water Technologies. This document provides specific design options to prevent floating.

Are There Any Special Backfill Requirements For Infiltrator Tanks?

No. Infiltrator tank can be installed with suitable native soil.

Are the Structural Bulkheads able to be modified or removed from the Tank?

The structural bulkhead system cannot be removed or modified.

Features

You can fill the tank with suitable native soil. For more information, refer to the installation instructions

  • Polypropylene construction is strong and injection-molded
  • Easy handling and delivery thanks to light-weight plastic construction and the inboard lifting lugs
  • Green integrated heavy-duty lids that can be interconnected with TW(tm), risers, and pipe riser solutions
  • Access ports that are structurally reinforced eliminate distortion during installation or pump-outs
  • Additional strength is provided by reinforced structural ribs and fiberglass bulkheads
  • Cover can be used with 6′-48′
  • Pump-outs: Can be dried
  • This tank is suitable for use as a pump tank, septic tank or rainwater (non potable) tank
  • There are no special backfill, installation or water filling requirements

Leave a Reply

Your email address will not be published. Required fields are marked *